A single Gates Rubber V belt is to be selected to deliver engine power to the wheel-drive transmission of a riding tractor. A 5-hp single-cylinder engine is used. At most, the belt transmits 60 percent of this power. The driving sheave has a diameter of 6.2 in. and the driven, 12.0 in. The belt selected should be as close to 92 in pitch length as possible. The engine speed is governor-controlled to a maximum of 3100 rev/min. Select a satisfactory belt, and specify it using the standard designation. How man

Respuesta :

Answer:

Hello there, please check step by step explanations to get answers.

Explanation:

Given that:

5-hp single-cylinder engine is used. At most, the belt transmits 60 percent of this power. The driving sheave has a diameter of 6.2 in. and the driven, 12.0 in. The belt selected should be as close to 92 in pitch length as possible. The engine speed is governor-controlled to a maximum of 3100 rev/min. Select a satisfactory belt, and specify it using the standard designation.

See attached documents for clearity and step by step procedure to answer

Ver imagen mkasblog
Ver imagen mkasblog
Ver imagen mkasblog
Ver imagen mkasblog
Ver imagen mkasblog
ACCESS MORE