Question

A lineman with 11 months on-the-job experience was electrocuted while working on grounded de-energized lines. He was working from a defective basket on an articulated boom aerial lift when the basket contacted energized lines which ran beneath the de-energized lines. The defective basket permitted current to pass through a drain hole cut into the body of the basket, then through the employee, and to ground via the de-energized line. What could have been done to avoid this accident?
Select all that apply.
A. Guards or barriers should have been erected as necessary to adjacent energized lines.
B. Nothing could have prevented this type of accident.
C. The worker should have been instructed on how to recognize and avoid unsafe conditions and also on regulations that apply to their work environment.
D.A boom aerial lift wasn't the appropriate lifting device
E.Had an inspection or test occurred before starting work, the defect would have been noted.

Answer 1

Answer:

A, C, & E

Explanation:

Adding barriers or guards would have prevented the basket from touching the energized lines. Also, if an inspection had occurred or the worker had received training that the defect in the basket could cause harm, this accident would have been avoided. Appropriate training would have alerted the worker to the dangers he faced.

Answer 2

For workplace safety to be done to avoid the accident that occurred, the following safety protocols could have been initiated:

A. Erection of guards or barriers as necessary to adjacent energized lines.

C. Instruction given to the worker on how to recognize unsafe conditions and also workplace regulation.

E. Inspection or testing to detect faults before starting work.

What is Workplace Safety?

Workplace safety can be described as protocols that limit elements that can cause serious accidents or other negative outcomes in work places.

Thus, for workplace safety to be done to avoid the accident that occurred, the following safety protocols could have been initiated:

A. Erection of guards or barriers as necessary to adjacent energized lines.

C. Instruction given to the worker on how to recognize unsafe conditions and also workplace regulation.

E. Inspection or testing to detect faults before starting work.

Learn more about workplace safety on:

https://brainly.com/question/14367881